NaN -Infinity

LILYGO® Shipping to worldwide

LoRa32 V1.0

LoRa32 V1.0

Wireless Module ESP32 LoRa 868/915Mhz OLED 0.96 Inch Display

$2.68
$2.68
Sale Sold out

Methods & Delivery Time

  1. Standard Express: 25-30 Days
  2. YunTu Express : 10-20 Days
    (Company name can't be used consignee)
  3. DHL: 10-17 Days
  4. FedEx: 10-17 Days

Please note that all delivery times are estimated for reference only.

Check More Info: Shipping Policy

We only charge the product cost and shipping cost.

1. For Standard Express Order: You may not need to deal with customs clearance, just need to pay attention to the track of the parcel, but this is not absolute, if your parcel is inspected by the customs, then you need to assist in dealing with customs clearance.

2. For DHL/ FedEx Order: You need to deal with the relevant customs clearance matters, as well as pay the tariff, the specific amount of tariff please pay attention to the policy of your country.

----------------------

The above tariffs are for reference only, please pay attention to your country's tax policy for more detailed instructions, if you need our help or have questions please feel free to contact us.

LoRa32 V1.0 Introduction

  • This product is an LoRa [SX1276 chip] Module based on ESP32  with 0.96 Inch OLED . As a LoRa remote modem, 868-915MHz frequency, high sensitivity and reliability, long transmission distance.

  • Supports for Arduino development environment perfectly, can be used for program checking and the development is easy and fast.

  • It is recommended to purchase two piece for testing in order to transmit and receive data facilitatly.

Specification

 MCU ESP32
 LoRa Chip SX1276
 Flash 4M
 USB to TTL chip CH910X
Antenna

Onboard WiFi 3D antenna

IPEX holder LoRa antenna
OLED

 0.96 Inch SSD1306 OLED 128*64
Operating voltage  3.3V to 7V
Operating temperature range -40 ° C to + 90 ° C
Data rates 150 Mbps @ 11n HT40, 72 Mbps @ 11n HT20, 54 Mbps @ 11g, 11 Mbps @ 11b
Transmit power 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n Receiver sensitivity up to -98 dBm
Red light power indicator
Blue light IO25 programmable control
Support for Sniffer software protocol analysis, Station, SoftAP, and Wi-Fi Direct modes
 UDP sustained throughput of 135 Mbps

Technology Support [Github]

If you need technical support please check the link to find more details.

LoRa32 V1.0

 

  • The 868/915MHz antenna needs to be in connection with the IPEX interface

  • Lithium battery charge and discharge circuit, when the battery is full, the blue LED will stop working.

  • When using, pay attention to “+”and "-" of the battery.

  • With IO port touch screen touch signal input, you need to add the 100nF pull-down capacitor to this pin!

  • Note: This product does not include the battery.

 

1. Size

2. Pin Diagram

 

 

LoRa32 V1.0 868/915Mhz Module

  • 1 X LoRa32 V1.0 868/915Mhz Module

  • 1 X Power cable (Jst 2pin 1.25mm)

  • 1 X LoRa 868/915Mhz Antenna

  • 2 X Pin

 

Waterproof Box [Color depends on your choice]

View full details

  • Who can use

    It's easier to master these development boards with a basic programming knowledge [engineers/ students/ makers, etc..]

  • Accelerated processing

    International orders please make sure your address is in English
    For Hong Kong, Macau and Taiwan orders, please note your personal ID.

  • Got a question

    Click on the bubble in the bottom right corner where some frequently asked questions are answered, or just drop us a line.

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
T
T.
Great Range and Reliable

These are great little devices! I've been using them for several years for communicating with my remote sensor network.

T
Tom Tingo

LoRa32 V1.0