Skip to product information
1 of 8

LILYGO®

LoRa32 V1.0 Kit

LoRa32 V1.0 Kit

ESP32 868/915Mhz Wireless Module 0.96 Inch OLED Display With Case

Regular price 214,00 zl PLN
Regular price Sale price 214,00 zl PLN
Sale Sold out

⚠️Please note that all policy page on site only applies to items purchased from our store: https://www.lilygo.cc.

Relevant technical or usage issues can be also discussed in our GitHub or Community.

About Tax

At present, the price of the platform does not include tax.
Customers in Europe should pay attention to the tax problem after the package reaches the local country.

[orders over 150 euros may generate tax, which needs to be borne/handled by the customer, the local policy shall prevail.]

Commended User

People with programming foundation[engineers / students / makers, etc..]

Shipping & Delivery

Our default shipping method: General transportation
[shipped by Freight Forwarder]

Receive Package

After shipment:

15-30days

【PS: If there are force majeure factors such as epidemic situation/ strike or local policy adjustment, transportation may be delayed,Maybe you will receive your package within 17-70 days】

NoteAll the times just for reference only

Tracking your order:

http://m-track.4px.com/#/

Also, if you want to get other shipping support please reference our shipping policy.

LoRa V1.0 Introduce

  • This product is an LoRa [SX1276 chip] Module based on ESP32  with 0.96 Inch OLED . As a LoRa remote modem, 868-915MHz frequency, high sensitivity and reliability, and long transmission distance.

  • Supports for Arduino development environment perfectly can be used for program checking and the development is easy and fast.

  • Support for Sniffer software protocol analysis, Station, SoftAP, and Wi-Fi Direct modes

If you don't want the Kit, check the LoRa32 V1.0

  • The 868/915MHz antenna needs to be in connection with the IPEX interface (if the antenna is not connected,  the signal will be weakened)

  • When using, pay attention to "+" and "-" of the battery, including built-in battery.

  • With IO port touch screen touch signal input, you need to add the 100nF pull-down capacitor to this pin!)

  • Please use our matching USB cable [micro interface is a little longer than the ordinary version]
  • It is recommended to purchase two-piece for testing in order to transmit and receive data facilitatly.

Technology Support [Github]

If you need technical support please check the link to find more details.

LoRa32 V1.0

 

 

Specification

 MCU ESP32
 LoRa Chip SX1276
 Flash 4M
 USB to TTL chip CH910X
Antenna

Onboard WiFi 3D antenna

LoRa antenna

OLED

 0.96 Inch SSD1306 OLED 128*64

Operating voltage  3.3V to 7V
Operating temperature range -40 ° C to + 90 ° C
Data rates 150 Mbps @ 11n HT40, 72 Mbps @ 11n HT20, 54 Mbps @ 11g, 11 Mbps @ 11b
Transmit power 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n Receiver sensitivity up to -98 dBm
Red light Power indicator
Blue light IO25 programmable control

1. Pin Diagram

View full details

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)