Wireless Module ESP32 LoRa 868/915Mhz OLED 0.96 Inch Display
⚠️Please note that all policy page on site only applies to items purchased from our store: https://www.lilygo.cc.
Relevant technical or usage issues can be also discussed in our GitHub or Community.
At present, the price of the platform does not include tax.
Customers in Europe should pay attention to the tax problem after the package reaches the local country.
[orders over 150 euros may generate tax, which needs to be borne/handled by the customer, the local policy shall prevail.]
People with programming foundation[engineers / students / makers, etc..]
Shipping & Delivery
Shipping & Delivery
Methods & Delivery Time
Standard Express: 25-30 Days
YunTu Express: 10-20 Days
DHL: 10-17 Days
FedEx: 10-17 Days
If you do not see one of the above shipping methods when checking out, it may be because your country does not support that shipping method, please select one of the available channels already listed or contact us for assistance.
Please note that all delivery times are estimated for reference only.
Please make sure your address is fully filled in (including province and continent, which will affect the shipping time of your order)
For more details please check our shipping policy.
LoRa32 V1.0 Introduction
This product is an LoRa [SX1276 chip] Module based on ESP32 with 0.96 Inch OLED . As a LoRa remote modem, 868-915MHz frequency, high sensitivity and reliability, long transmission distance.
Supports for Arduino development environment perfectly, can be used for program checking and the development is easy and fast.
- It is recommended to purchase two piece for testing in order to transmit and receive data facilitatly.
|USB to TTL chip||CH910X|
Onboard WiFi 3D antenna
IPEX holder LoRa antenna
0.96 Inch SSD1306 OLED 128*64
|Operating voltage||3.3V to 7V|
|Operating temperature range||-40 ° C to + 90 ° C|
|Data rates||150 Mbps @ 11n HT40, 72 Mbps @ 11n HT20, 54 Mbps @ 11g, 11 Mbps @ 11b|
|Transmit power||19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n Receiver sensitivity up to -98 dBm|
|Red light||power indicator|
|Blue light||IO25 programmable control|
|Support for Sniffer software protocol analysis, Station, SoftAP, and Wi-Fi Direct modes|
|UDP sustained throughput of 135 Mbps|
Technology Support [Github]
If you need technical support please check the link to find more details.
The 868/915MHz antenna needs to be in connection with the IPEX interface
Lithium battery charge and discharge circuit, when the battery is full, the blue LED will stop working.
When using, pay attention to “+”and "-" of the battery.
With IO port touch screen touch signal input, you need to add the 100nF pull-down capacitor to this pin!
Note: This product does not include the battery.
2. Pin Diagram
LoRa32 V1.0 868/915Mhz Module
1 X LoRa32 V1.0 868/915Mhz Module
1 X Power cable (Jst 2pin 1.25mm)
1 X LoRa 868/915Mhz Antenna
2 X Pin
Waterproof Box [Color depends on your choice]