LILYGO® Shipping to worldwide
LoRa32 V1.0 Kit/ Sold Out
LoRa32 V1.0 Kit/ Sold Out
ESP32 868/915Mhz Wireless Module 0.96 Inch OLED Display With Case
Couldn't load pickup availability
Share
About Shipping
About Shipping
Methods & Delivery Time
- Standard Express: 25-30 Days
- YunTu Express : 10-20 Days
(Company name can't be used consignee) - DHL: 10-17 Days
- FedEx: 10-17 Days
Please note that all delivery times are estimated for reference only.
Check More Info: Shipping Policy
About Tax
About Tax
We only charge the product cost and shipping cost.
1. For Standard Express Order: You may not need to deal with customs clearance, just need to pay attention to the track of the parcel, but this is not absolute, if your parcel is inspected by the customs, then you need to assist in dealing with customs clearance.
2. For DHL/ FedEx Order: You need to deal with the relevant customs clearance matters, as well as pay the tariff, the specific amount of tariff please pay attention to the policy of your country.
----------------------
The above tariffs are for reference only, please pay attention to your country's tax policy for more detailed instructions, if you need our help or have questions please feel free to contact us.
LoRa V1.0 Introduce
-
This product is an LoRa [SX1276 chip] Module based on ESP32 with 0.96 Inch OLED . As a LoRa remote modem, 868-915MHz frequency, high sensitivity and reliability, and long transmission distance.
-
Supports for Arduino development environment perfectly can be used for program checking and the development is easy and fast.
- Support for Sniffer software protocol analysis, Station, SoftAP, and Wi-Fi Direct modes
If you don't want the Kit, check the LoRa32 V1.0
-
The 868/915MHz antenna needs to be in connection with the IPEX interface (if the antenna is not connected, the signal will be weakened)
-
When using, pay attention to "+" and "-" of the battery, including built-in battery.
-
With IO port touch screen touch signal input, you need to add the 100nF pull-down capacitor to this pin!)
- Please use our matching USB cable [micro interface is a little longer than the ordinary version]
- It is recommended to purchase two-piece for testing in order to transmit and receive data facilitatly.
Technology Support [Github]
If you need technical support please check the link to find more details.
Specification
MCU | ESP32 |
LoRa Chip | SX1276 |
Flash | 4M |
USB to TTL chip | CH910X |
Antenna |
Onboard WiFi 3D antenna LoRa antenna |
OLED |
0.96 Inch SSD1306 OLED 128*64 |
Operating voltage | 3.3V to 7V |
Operating temperature range | -40 ° C to + 90 ° C |
Data rates | 150 Mbps @ 11n HT40, 72 Mbps @ 11n HT20, 54 Mbps @ 11g, 11 Mbps @ 11b |
Transmit power | 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n Receiver sensitivity up to -98 dBm |
Red light | Power indicator |
Blue light | IO25 programmable control |
1. Pin Diagram
-
Who can use
It's easier to master these development boards with a basic programming knowledge [engineers/ students/ makers, etc..]
-
Accelerated processing
International orders please make sure your address is in English
For Hong Kong, Macau and Taiwan orders, please note your personal ID. -
Got a question
Click on the bubble in the bottom right corner where some frequently asked questions are answered, or just drop us a line.