Skip to product information
1 of 8

Ship to Worldwide

T-Keyboard S3 Pro

T-Keyboard S3 Pro

Default Firmware and I2C Expansion Mode

Regular price $61.89 USD
Regular price Sale price $61.89 USD
Sale Sold out

⚠️If you need technical support, you can get a quicker response on our GitHub (the tech team will check it directly). Please provide your Tax/Personal ID (if available), this will expedite the shipment of your order.

Instructions Before Order

If you order the wrong product or want to add another or change your shipping address, please re-edit the correct information and place a new order, then contact us to cancel the incorrect order.

If you have a tax ID or personal ID please provide as much as possible, otherwise, if your country requires this information we will block your order and contact you via email, which will slow down the shipment.

We strongly recommend choosing DHL or FedEx if your order is over $200.

Generally, except for DHL or FedEx, we will automatically split orders over $150-200 into two packages due to customs clearance, loss prevention issues, etc.

For more please check here

Shipping & Delivery

Methods & Delivery Time

  1. Standard Express/ YanWen: 25-30 Days
  2. EUB: 25-30 Days
  3. YunTu Express : 10-20 Days
    (Company name can't be used consignee)
  4. DHL: 10-17 Days
  5. FedEx: 10-17 Days

Please note that all delivery times are estimated for reference only.

If you do not see one of the above shipping methods when checking out, it may be because your country does not support that shipping method, please select one of the available channels already listed or contact us for help.

Please make sure your address is fully filled in (including province and continent, which will affect the shipping time of your order)

For more details please check our shipping policy.

About Tax

At present, the price of the platform does not include any tax.
European customers should pay attention to the tax problem after the package reaches the local country, which needs to be borne/handled by the customer, the local policy shall prevail

[orders over 150 euros may generate tax (Amount for reference only), for orders over this amount, we will not inform the customer separately, so please pay attention to it by yourself.]

What upgrades have been made?

Four magnetic connectors with quick connects have been introduced.
Five screens. The fifth screen position on the host computer can be replaced with a rotary encoder.

14 programmable RGB LEDs on the board. The brightness of all of these lights can be set to the maximum value when a single board is in operation.

Specifications

MCU1 ESP32-S3R8 Dual-core LX7 microprocessor
Wireless Connectivity 2.4 GHz Wi-Fi & Bluetooth5 (LE)
Development Arduino
Flash 16MB
PSRAM 8MB
MCU2 STM32G030F6P6
Flash 64kb
PSRAM 8kb
Onboard Button Reset Button + WS2812 + Encoder

0.85 inch All ViewTFT LCD X 4

Resolution 128(H)RGB X 128(V)
Drive IC GC9107
Active Area 15.2064(H) X 15.2064 (V)mm

---Tip---

1. The default firmware is set to I2C communication expansion mode. 
It is important to note that to expand the number of slave devices, each additional
device must have a unique I2C address.
Slave devices cannot be used independently, the correct usage is in a setup where one
master device communicates with multiple slave devices.

2.  Up to 6 devices can be connected, when connecting more than one device you need to reduce the maximum brightness of the on-board LED to 10.
3. There are some limitations on the expansion direction of the board due to the long distance wiring of the hardware. Only one device can be expanded on the left and right sides of the mainframe, and a maximum of two devices can be expanded downward (USB ports will prevent expansion). This creates a 2x3 grid layout with a total of 6 devices.
4. When running multiple boards, it is not advisable to set the brightness to maximum due to the large number of LED. (If all the LEDs are on, a lot of heat is generated, and the USB ports have limited supply current.)

--- LILYGO GitHub Support --- 

 

ℹ️Product Information
Check out our GitHub repository for sample code and more detailed information about this board.

 🧑‍💻Technical support
Visit our GitHub community, post a description of the problem and our engineers will help you directly.


--- What's in the box --- 


T-Keyboard S3 Pro

Slave Keyboard

View full details

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)