LILYGO® Shipping to worldwide
Default Firmware and I2C Expansion Mode
Couldn't load pickup availability
Methods & Delivery Time
Please note that all delivery times are estimated for reference only.
Check More Info: Shipping Policy
We only charge the product cost and shipping cost.
1. For Standard Express Order: You may not need to deal with customs clearance, just need to pay attention to the track of the parcel, but this is not absolute, if your parcel is inspected by the customs, then you need to assist in dealing with customs clearance.
2. For DHL/ FedEx Order: You need to deal with the relevant customs clearance matters, as well as pay the tariff, the specific amount of tariff please pay attention to the policy of your country.
----------------------
The above tariffs are for reference only, please pay attention to your country's tax policy for more detailed instructions, if you need our help or have questions please feel free to contact us.
| Four magnetic connectors with quick connects have been introduced. |
| Five screens. The fifth screen position on the host computer can be replaced with a rotary encoder. |
|
14 programmable RGB LEDs on the board. The brightness of all of these lights can be set to the maximum value when a single board is in operation. |
| MCU1 | ESP32-S3R8 Dual-core LX7 microprocessor |
| Wireless Connectivity | 2.4 GHz Wi-Fi & Bluetooth5 (LE) |
| Development | Arduino |
| Flash | 16MB |
| PSRAM | 8MB |
| MCU2 | STM32G030F6P6 |
| Flash | 64kb |
| PSRAM | 8kb |
| Onboard Button | Reset Button + WS2812 + Encoder |
0.85 inch All ViewTFT LCD X 4
| Resolution | 128(H)RGB X 128(V) |
| Drive IC | GC9107 |
| Active Area | 15.2064(H) X 15.2064 (V)mm |
|
1. The default firmware is set to I2C communication expansion mode. |
| 2. Up to 6 devices can be connected, when connecting more than one device you need to reduce the maximum brightness of the on-board LED to 10. |
| 3. There are some limitations on the expansion direction of the board due to the long distance wiring of the hardware. Only one device can be expanded on the left and right sides of the mainframe, and a maximum of two devices can be expanded downward (USB ports will prevent expansion). This creates a 2x3 grid layout with a total of 6 devices. |
| 4. When running multiple boards, it is not advisable to set the brightness to maximum due to the large number of LED. (If all the LEDs are on, a lot of heat is generated, and the USB ports have limited supply current.) |
|
ℹ️Product Information 🧑💻Technical support |
T-Keyboard S3 Pro
Slave Keyboard
