LILYGO®
ESP32-S3 1.9 inch ST7789 LCD Display Touch Screen Development Board
Couldn't load pickup availability
⚠️Please note that all policy page on site only applies to items purchased from our store: https://www.lilygo.cc.
Relevant technical or usage issues can be also discussed in our GitHub or Community.
About Tax
About Tax
At present, the price of the platform does not include tax.
Customers in Europe should pay attention to the tax problem after the package reaches the local country.
[orders over 150 euros may generate tax, which needs to be borne/handled by the customer, the local policy shall prevail.]
Commended User
Commended User
People with programming foundation[engineers / students / makers, etc..]
Shipping & Delivery
Shipping & Delivery
Methods & Delivery Time
Standard Express: 25-30 Days
YunTu Express: 10-20 Days
DHL: 10-17 Days
FedEx: 10-17 Days
NOTE
If you do not see one of the above shipping methods when checking out, it may be because your country does not support that shipping method, please select one of the available channels already listed or contact us for assistance.
Please note that all delivery times are estimated for reference only.
Please make sure your address is fully filled in (including province and continent, which will affect the shipping time of your order)
For more details please check our shipping policy.
LILYGO® T-Display-S3 ESP32-S3 1.9 inch ST7789 LCD Display Development Board WIFI Bluetooth5.0 Wireless Module 170*320 Resolution
T-Display-S3 is a development board whose main control chip is ESP32-S3. It is equipped with a 1.9-inch LCD color screen and two programmable buttons. Communication using the I8080 interface Retains the same layout design as T-Display. You can directly use ESP32S3 for USB communication or programming.
The shell is only available for the soldered and non-soldered versions of the S3, not for the touch version.
Note:
- Please use USB2.0 (USB A-USB C) cable.
- Compatible With ST7789.
LILYGO® August 1, 2022
What's the difference between the soldering and not soldering version? Check the picture!
Touch Screen Version
Specifications
| MCU | ESP32-S3R8 Dual-core LX7 microprocessor |
| Wireless Connectivity | Wi-Fi 802.11, BLE 5 + BT mesh |
| Programming Platform | Arduino-ide、 Micropython |
| Flash | 16MB |
| PSRAM | 8MB |
| Bat voltage detection | IO04 |
| Onboard functions | Boot + Reset + IO14 Button |
| LCD | 1.9" diagonal, Full-color TFT Display |
| Drive Chip | ST7789V |
| Resolution | 170(H)RGB x320(V) 8-Bit Parallel Interface |
| Working power supply | 3.3v |
| Support |
STEMMA QT / Qwiic JST-SH 1.0mm 4-PIN |
| Connector | JST-GH 1.25mm 2PIN |
Sample Code For Reference [Github]
If you need technical support please check below link to find more details.
T-Display-S3
What engineers have done with T-Display-S3
T-Display-S3 Introduction
-
The T-Display series has added a new member.
-
It comes with the latest ESP32-S3 [Wi-Fi 802.11, BLE 5 + BT mesh].
-
The screen has also been expanded from the original 1.14 inches to 1.9 inches, and an acrylic plate has been added to fix it.
-
This will be the second LILYGO model Display with an acrylic plate fixed.
-
The overall design continues the design of the T-Display series.
1. Size
2. Pin Diagram
3. More details
Without welding option
Welding option
