LILYGO® Shipping to worldwide
T-Display-S3
T-Display-S3
ESP32-S3 1.9 inch ST7789 LCD Display Touch Screen Development Board
Couldn't load pickup availability
About Shipping
About Shipping
Methods & Delivery Time
- Standard Express: 25-30 Days
- YunTu Express : 10-20 Days
(Company name can't be used consignee) - DHL: 10-17 Days
- FedEx: 10-17 Days
Please note that all delivery times are estimated for reference only.
Check More Info: Shipping Policy
About Tax
About Tax
We only charge the product cost and shipping cost.
1. For Standard Express Order: You may not need to deal with customs clearance, just need to pay attention to the track of the parcel, but this is not absolute, if your parcel is inspected by the customs, then you need to assist in dealing with customs clearance.
2. For DHL/ FedEx Order: You need to deal with the relevant customs clearance matters, as well as pay the tariff, the specific amount of tariff please pay attention to the policy of your country.
----------------------
The above tariffs are for reference only, please pay attention to your country's tax policy for more detailed instructions, if you need our help or have questions please feel free to contact us.
With shell are soldered versions
T-Display-S3 is a development board whose main control chip is ESP32-S3. It is equipped with a 1.9-inch LCD color screen and two programmable buttons. Communication using the I8080 interface Retains the same layout design as T-Display. You can directly use ESP32S3 for USB communication or programming.
The shell is only available for the soldered and non-soldered versions , not for the touch version, and the S3 with shell are soldered versions.
Note:
- Please use USB2.0 (USB A-USB C) cable.
- Compatible With ST7789.
LILYGO® August 1, 2022
There are MIDI expansion boards for use with the T-Display S3
Connect it to headphones or a stereo and playback the simulated sound!
Compatible with all versions of T-Display S3.
[Please note that the package does not include the T-Display S3 device, only the MIDI Board, please select the right version of the T-Display S3 to use with the MIDI Board according to your needs].
Specifications
| MCU | ESP32-S3R8 Dual-core LX7 microprocessor |
| Wireless Connectivity | Wi-Fi 802.11, BLE 5 + BT mesh |
| Programming Platform | Arduino-ide、 Micropython |
| Flash | 16MB |
| PSRAM | 8MB |
| Bat voltage detection | IO04 |
| Onboard functions | Boot + Reset + IO14 Button |
| LCD | 1.9" diagonal, Full-color TFT Display |
| Drive Chip | ST7789V |
| Resolution | 170(H)RGB x320(V) 8-Bit Parallel Interface |
| Working power supply | 3.3v |
| Support |
STEMMA QT / Qwiic JST-SH 1.0mm 4-PIN |
| Connector | JST-GH 1.25mm 2PIN |
Sample Code For Reference [Github]
If you need technical support please check below link to find more details.
T-Display-S3
T-Display-S3 Introduction
- The T-Display series has added a new member.
- It comes with the latest ESP32-S3 [Wi-Fi 802.11, BLE 5 + BT mesh].
- The screen has also been expanded from the original 1.14 inches to 1.9 inches, and an acrylic plate has been added to fix it.
- This will be the second LILYGO model Display with an acrylic plate fixed.
- The overall design continues the design of the T-Display series.
Pin Diagram
basic version
Touch Version
More details
What's In The Box
Not Solder Version
Solder Version
Only MIDI Board
[Please note that the package does not include the T-Display S3 device, only the MIDI Board, please select the appropriate version of the S3 to use with the MIDI Board according to your needs].
Customer Reviews
My experience has been mixed. I bought 5 of the T-Display-S3 and had issues with 2 of them.
With one ghost "touches" start happening about 1-2 minutes after it is powered. The controller thinks the display is being touched, while it is not.
The other device has a different problem. When powered from a battery, the display sometimes powers up, sometimes not. That's despite pin 15 being set to high.
The same firmware runs perfectly on the other 3 devices, without any external hardware connected, so the problems are likely from the T-Display hardware.
The device does a very good job, but I will have to do more testing to see if it will be reliable in the long term.
I use the T-display-s3 for a variety of automation and sensing projects. The display is helpful for diagnostics and data display.
I use the Esphome development platform for all my esp32 projects.
The only issue I have with this device is the display driver for esphome requires the arduino framework ... this restricts what I can do with the device.
For example, secure MQTT requires the esp-idf framework.
The product is excellent the shipping good, and we will see how this customer service works. I am having a bear of a time to get this thing programmed. i have been all over the WWW and have seen different methods. Right now I have a bricked device so I ordered another which arrived, but still cannot find a way to program it if you can assist it would be great. Respectfully, Kerry
One of my five displays has a loose contact. I’m still waiting for an answer from the support.
Hi Sir,
Sorry for that, but don't worry, our support team will contact you again soon.
These are my go-to for any ESP32 project where I need the device to have a touch controlled user interface. Saves you from the grief of having so set up a bunch of external push buttons.
