Shipping to Europe only
ESP32-S3 1.9 inch ST7789 LCD Display Touch Screen Development Board
⚠️If you need technical support, you can get a quicker response on our GitHub (the tech team will check it directly). The products in this link are shipped from the German warehouse, which only ships to Germany and Europe.
Instructions Before Order
Instructions Before Order
If you order the wrong product or want to add another or change your shipping address, please re-edit the correct information and place a new order, then contact us to cancel the incorrect order.
If you have a tax ID or personal ID please provide as much as possible, otherwise, if your country requires this information we will block your order and contact you via email, which will slow down the shipment.
We strongly recommend choosing DHL or FedEx if your order is over $200.
Generally, except for DHL or FedEx, we will automatically split orders over $150-200 into two packages due to customs clearance, loss prevention issues, etc.
For more please check here
Shipping & Delivery
Shipping & Delivery
Methods & Delivery Time
- Standard Express/ YanWen: 25-30 Days
- EUB: 25-30 Days
- YunTu Express : 10-20 Days
(Company name can't be used consignee) - DHL: 10-17 Days
- FedEx: 10-17 Days
Please note that all delivery times are estimated for reference only.
If you do not see one of the above shipping methods when checking out, it may be because your country does not support that shipping method, please select one of the available channels already listed or contact us for help.
Please make sure your address is fully filled in (including province and continent, which will affect the shipping time of your order)
For more details please check our shipping policy.
About Tax
About Tax
At present, the price of the platform does not include any tax.
European customers should pay attention to the tax problem after the package reaches the local country, which needs to be borne/handled by the customer, the local policy shall prevail
[orders over 150 euros may generate tax (Amount for reference only), for orders over this amount, we will not inform the customer separately, so please pay attention to it by yourself.]
LILYGO® T-Display-S3 ESP32-S3 1.9 inch ST7789 LCD Display Development Board WIFI Bluetooth5.0 Wireless Module 170*320 Resolution.
T-Display-S3 is a development board whose main control chip is ESP32-S3. It is equipped with a 1.9-inch LCD color screen and two programmable buttons. Communication using the I8080 interface Retains the same layout design as T-Display. You can directly use ESP32S3 for USB communication or programming.
The shell is only available for the soldered and non-soldered versions of the S3, not for the touch version, and the S3 with shell are soldered versions
Note:
- Please use USB2.0 (USB A-USB C) cable.
- Compatible With ST7789.
LILYGO® August 1, 2022
What's the difference between the soldering and not soldering version? Check the picture!
Touch Screen Version
Specifications
MCU | ESP32-S3R8 Dual-core LX7 microprocessor |
Wireless Connectivity | Wi-Fi 802.11, BLE 5 + BT mesh |
Programming Platform | Arduino-ide、 Micropython |
Flash | 16MB |
PSRAM | 8MB |
Bat voltage detection | IO04 |
Onboard functions | Boot + Reset + IO14 Button |
LCD | 1.9" diagonal, Full-color TFT Display |
Drive Chip | ST7789V |
Resolution | 170(H)RGB x320(V) 8-Bit Parallel Interface |
Working power supply | 3.3v |
Support |
STEMMA QT / Qwiic JST-SH 1.0mm 4-PIN |
Connector | JST-GH 1.25mm 2PIN |
Sample Code For Reference [Github]
If you need technical support please check below link to find more details.
T-Display-S3
What engineers have done with T-Display-S3
Car Dashboard/Controller, Game, Monitors....
T-Display-S3 Introduction
-
The T-Display series has added a new member.
-
It comes with the latest ESP32-S3 [Wi-Fi 802.11, BLE 5 + BT mesh].
-
The screen has also been expanded from the original 1.14 inches to 1.9 inches, and an acrylic plate has been added to fix it.
-
This will be the second LILYGO model Display with an acrylic plate fixed.
-
The overall design continues the design of the T-Display series.
1. Size
2. Pin Diagram
3. More details
Without welding option
Welding option
Share
Great product and delivery from the DE warehouse to Europe was very fast.
this device is perfect , i recomend to get it presolder if you are not confident with soldering in small gap
I am using this with LVGL squareline studio. I finally solved the problem with rotating the display to landscape.
Love it