LILYGO®
LILYGO® LoRa V1.4 ESP32 SX1278 433Mhz Wireless Module 0.96 OLED WiFi Bluetooth Development Board Ultra-low Power Consumption
Couldn't load pickup availability
⚠️Please note that all policy page on site only applies to items purchased from our store: https://www.lilygo.cc.
Relevant technical or usage issues can be also discussed in our GitHub or Community.
About Tax
About Tax
At present, the price of the platform does not include tax.
Customers in Europe should pay attention to the tax problem after the package reaches the local country.
[orders over 150 euros may generate tax, which needs to be borne/handled by the customer, the local policy shall prevail.]
Commended User
Commended User
People with programming foundation[engineers / students / makers, etc..]
Shipping & Delivery
Shipping & Delivery
Methods & Delivery Time
Standard Express: 25-30 Days
YunTu Express: 10-20 Days
DHL: 10-17 Days
FedEx: 10-17 Days
NOTE
If you do not see one of the above shipping methods when checking out, it may be because your country does not support that shipping method, please select one of the available channels already listed or contact us for assistance.
Please note that all delivery times are estimated for reference only.
Please make sure your address is fully filled in (including province and continent, which will affect the shipping time of your order)
For more details please check our shipping policy.
LILYGO® LoRa V1.4 ESP32 SX1278 433Mhz Wireless Module 0.96 OLED WiFi Bluetooth Development Board Ultra-low Power Consumption
LoRa V1.4 ESP32 SX1278 Introduce
-
This product is a SX1278 433Mhz chip based on ESP32 increased OLED, namely LoRa remote modem, 433MHz frequency, high sensitivity is about -148dBm, +20dBm output power, high reliability, long transmission distance.
-
The 4Mt bytes (32 Mt bit) Flash on board, Wi-Fi antenna, 0.96 inch blue OLED display, lithium battery charging circuit, CH9102F interface and USB serial chip, support for Arduino development environment perfectly, can be used for program verification and product development is very simple and fast.
Notice：
-
The 433MHz antenna must be used in conjunction with the IPEX interface (if the antenna is not connected, The signal will weaken).
-
Lithium battery charging and discharging circuit, when the battery is full, the LED will stop working.
-
When using, pay attention to "+" and "-" of the battery.Using the IO port touch screen touch signal input, you need to add the 100nF pull-down capacitor at this pin!
-
Operating voltage: 3.3V to 7
-
VOperating temperature range: -40 degrees C to +90 degrees C
-
Support for Sniffer, Station, softAP, and Wi-Fi Direct modes
-
Data rates: 150 Mbps@11n HT40, 72 Mbps@11n HT20, 54 Mbps@11g, 11 Mbps@11b
-
Transmit power: 19.5 dBm@11b, 16.5 dBm@11g, 15.5 dBm@11n
-
Receiver sensitivity up to -98 dBm
-
Red light: power indicator
-
Blue light: IO25 programmable control
Github:
https://github.com/Xinyuan-LilyGO/LilyGo-LoRa-Series
Test details
UDP sustained throughput of 135 Mbps
Remark：The battery is for display only, shipment does not include battery.
- [LoRa V1.4 433Mhz ] 1PCS
-
1 X LoRa V1.4 433Mhz CH9102F
-
1 X Power cable (Jst 2pin 1.25mm)
-
1 X Antenna
-
2 X Pin
- [LoRa V1.4 433Mhz + T-U2T] 1PCS
-
1 X LoRa V1.4 433Mhz CH9102F
-
1 X Power cable (Jst 2pin 1.25mm)
-
1 X Antenna
-
2 X Pin
-
1 X T-U2T
- [LoRa V1.4 433Mhz + T-U2T] 2PCS
-
2 X LoRa V1.4 433Mhz CH9102F
-
2 X Power cable (Jst 2pin 1.25mm)
-
2 X Antenna
-
4 X Pin
-
2 X T-U2T
