Skip to product information
1 of 6

LILYGO®

T5-4.7 Inch E-paper

T5-4.7 Inch E-paper

ESP32 V3 Version 16MB FLASH 8MB PSRAM Module Developme Board

Regular price $34.15 USD
Regular price Sale price $34.15 USD
Sale Sold out

⚠️If you need technical support, you can get a quicker response on our GitHub (the tech team will check it directly). Please provide your Tax/Personal ID (if available), this will expedite the shipment of your order.

Instructions Before Order

If you order the wrong product or want to add another or change your shipping address, please re-edit the correct information and place a new order, then contact us to cancel the incorrect order.

If you have a tax ID or personal ID please provide as much as possible, otherwise, if your country requires this information we will block your order and contact you via email, which will slow down the shipment.

We strongly recommend choosing DHL or FedEx if your order is over $200.

Generally, except for DHL or FedEx, we will automatically split orders over $150-200 into two packages due to customs clearance, loss prevention issues, etc.

For more please check here

Shipping & Delivery

Methods & Delivery Time

  1. Standard Express: 25-30 Days
  2. EUB: 25-30 Days
  3. YunTu Express : 10-20 Days
    (Company name can't be used consignee)
  4. DHL: 10-17 Days
  5. FedEx: 10-17 Days
  6. YanWen: 20-35 Days

Please note that all delivery times are estimated for reference only.

During ship, maybe some methods of transport do not update the logistic track until the parcel reaches the destination country.

If you do not see one of the above shipping methods when checking out, it may be because your country does not support that shipping method, please select one of the available channels already listed or contact us for help.

Please make sure your address is fully filled in (including province and continent, which will affect the shipping time of your order)

For more details please check our shipping policy.

About Tax

At present, the price of the platform does not include any tax.
European customers should pay attention to the tax problem after the package reaches the local country, which needs to be borne/handled by the customer, the local policy shall prevail

[orders over 150 euros may generate tax (Amount for reference only), for orders over this amount, we will not inform the customer separately, so please pay attention to it by yourself.]

LILYGO® TTGO T5-4.7 Inch E-paper ESP32 V3 Version 16MB FLASH 8MB PSRAM WIFI/Bluetooth Module Development Board for Arduino.

Sold out, already upgraded to the new version! Check here:

E-paper V2.3

 

Note: 

  1. The Clamp Edge of the 18650 Battery Holder is relatively sharp.
  2. Be careful not to scratch the battery cover when installing.

Specification 

T5 4.7 inch E-Paper motherboard parameters
Main chip ESP32-WROVER-E
Screen 4.7-inch e-ink screen
Function Support touch function[Need to purchase touch screen]
Expandable Expandable sensor slot
Support Reset button hard restart
Power Supply

18650 battery / Jst PH 2.0)

(version optional)

Programmable keys IO39, IO34, IO35, IO0
4Pin Connector  MOLEX 51065-0410
Develop software
Support Arduino
Support IDF
Support Micropython
Application scenario
Support Desktop weather station
Support STEM Education
Support IoT device

T5 4.7-inch E-Paper
T5 4.7-inch E-Paper is another version of the T5 series of electronic ink screens.
The T5 series of ink screen versions include 1.02, 1.54, 2.13, etc., from small to large electronic ink screen versions.

We have been committed to low-power design optimization.
This 4.7-inch version continues the low-power design, the sleep mode current is about 170uA, and two optional battery modes are designed on the back.

One is PH 2.0 pitch 2pin interface, and the other is a 18650 battery metal connector.
Two power supply modes for you to choose from.
A 6pin touch screen interface is reserved as an optional accessory to facilitate your application.

There are 5 buttons reserved on the side, 3 of which are custom buttons, which can define functions flexibly. One is the reset button.

GitHub Link:

LilyGo-EPD47

3D printed shell file:

3D_file

LILYGO T5-4.7 E-Paper is attached to the refrigerator by soldering magnetic screw:

https://www.youtube.com/watch?spm=a2g0o.detail.1000023.4.357f3f30Ye72n6&v=rzsPAy_RVZI

 1. Size

2. Pin Diagram

18650 9102 Chip

1 X T5-4.7 inch E-paper 18650 battery holder version(Without battery)

PH 2.0 9102 Chip

1 X T5-4.7 inch E-paper PH 2.0 holder version(Without battery)

View full details

Customer Reviews

Based on 2 reviews
50%
(1)
0%
(0)
0%
(0)
0%
(0)
50%
(1)
J
Jobit Joseph
Excellent display for battery operated projects

The look of this display is amazing. Perfect for desktop clock, weather station projects

G
Glenn Cochrane
Dead on arrivel

Well nothing to say ither than it never worked ...